HDM 5049 PLUS
Safety Instructions
Page 1-1
1 SAFETY INSTRUCTIONS
•
Read the safety and operating instructions before operating the monitor.
•
Retain safety and operating instructions for future reference.
•
Adhere to all warnings on the monitor and in the operating instructions manual.
•
Follow all instructions for operation and use.
This monitor conforms to the following rules: DHHS21, IEC950/EN60950, UL1950, C-UL950.
1.1 FCC Notice
This equipment has been tested and found to comply with the limits of a class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
1.2 Power Connection
•
Power requirements: connect the monitor to an AC voltage as indicated at its back. Using a
lower voltage, the monitor will not be able to operate. Using a higher voltage may damage the
monitor.
THIS APPARATUS MUST BE EARTHED!
The wires in the mains lead are colored in accordance to the following code :
CEE7 and British Standard:
Green-and-yellow: Earth (safety earth)
Blue: Neutral
Brown: Live
ANSI 73.11:
Green-and-yellow: Ground
White: Neutral
Black: Live
•
Do not overload wall outlets and extension cords as this may result in fire or electric shock.
•
Mains lead protection (U.S.: Power cord): Supply cords should be routed so that they are not
likely to be walked upon or pinched by items placed upon or against them, paying particular
attention to cords at plugs and receptacles.
1.3 Water and Moisture
•
Never expose the monitor to rain or moisture.
•
Never use the monitor near water.
WARNING!
