Barco HDF W22 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 453

Barco HDF W22 Скачать руководство пользователя страница 23

2. Configurations, requirements and restrictions

2.2

Unpacking the projector

What has to be done ?

At delivery the projector is packed in a carton box upon a wooden pallet and secured with banding and fastening clips. Furthermore,
to provide protection during transportation, the projector is surrounded with foam. Once the projector is arrived at the installation
site, it has to be removed from the carton box and wooden pallet in a safe manner without damaging the projector.

Necessary tools

•

Side cutter.

•

8 mm Allen key.

How to unpack the projector ?

1. Remove the banding around the carton box, by releasing the fastening clips as illustrated, and remove the top cover.

Image 2-1

2. Remove the power cord, which is attached to the packaging with a cable ties, and the two smaller carton boxes, located between

the inner carton sleeve and outer carton box.

Note:

The two smaller carton boxes contain the manuals, the remote control unit (RCU), two standard batteries size AA and
four rigging clamps for projector suspension.

Image 2-2

3. Remove the carton box, the inner carton sleeve and the foam around the projector. See image 2-2.

Note:

The projector is still attached to a wooden plate, which is detached from the below pallet.

4. Gently turn the projector upside down to gain access to the four bolts, which secure the projector. Note that this wooden plate is

detached from the pallet.

Tip:

Lay a blanket (or the earlier removed foam) on the

fl

oor to protect the projector housing form scratches while turning.

R5905158 HDF SERIES 08/12/2016

19

«
...
21
22
23
24
25
...
»

Содержание HDF W22






































































































































































































































































































































































































































































Отзывы:

Нет отзывов