Barco Galaxy 4 Long Life+ R9040355, Руководство пользователя

Страница: 151 / 173

9. Service Mode
9.8.6 Lamp Runtime Warning
What can be done?
The Lamp Runtime Warning of the projector can work in one of the following modes:
Maximum The Lamp Runtime is displayed when the lamp is operated
longer than 1000 or 1500 (depending on the lamp type).
Typical The Lamp Runtime is displayed when the lamp is operated
longer than 800 or 1200 (depending on the lamp type).
Lamp Runtime Warning
1. Push the cursor key ↑ or ↓ to highlight
Target CLO Lumens.
(menu 9-19)
2. Press
ENTER
to toggle between Maximum or Typical mode.
3. Press
EXIT
to return to the
Service
menu.
LAMP
CONSTANT LIGHT OUTPUT [ON]
LINKED CLO [SLAVE]
MODE [NORMAL]
TARGET CLO LUMENS: 10000
LAMP RUNTIME WARNING [MAXIMUM]
_________________________________
Serial number : 003706
Article number : R9840740
Run time : 140 hours
Remaining run time : 1360
hours
Number of strikes : 160
Z-axis : 100 units
_________________________________
Select with
↑
or
↓
<ENTER> to toggle
<EXIT> to return
Menu 9-19
9.9 Infitec-Wheel Index
C
AUTION
:
Changing these settings may seriously affect the performance of the projector.
C
AUTION
:
This adjustment can only be done by a Barco qualified service technician.
Infitec-Wheel Index
Do not change the Infitec-Wheel Index, always use the Stereo Phase adjustment to adjust the projector for a perfect Stereo Image ().
9.10 Infitec-Wheel Preset
Infitec-Wheel Preset
This menu item will reset the Infitec-Wheel Index to the factory preset.
9.11 Barco Logo
9.11.1 Starting Up Logo
What can be done?
The Barco can be added to the projected image, in overlay or on a background, on any place on the screen.
R5976780 GALAXY SXGA+ SERIES 14/10/2005 147