Barco Galaxy 12 High Brightness+ R9040370, Руководство пользователя

Страница: 47 / 173

5. Getting Started
16 Cursor keys to make menu selections when in the adjustment mode or to zoom/focus when the direct
access is active.
Comparison between the cursor keys and the use of the ’+’ and ’-’ keys on the local keypad
: RCU = local keypad
cursor key up = ’+’ key up
cursor key down = ’-’ key down
cursor key right = ’+’ key right
cursor key left = ’-’ key left
17 EXIT to leave the adjustment mode or to scroll upwards when in the adjustment mode.
18 RCU operation indication lights up when a button on the remote control is pressed. (This is a visual indicator to
check the operation of the remote control)
Table 5-1
5.3 Operating the projector
Overview
• Switching On
• Switching to standby
• Switching off
• Temperature error DMD
5.3.1 Switching On
How to switch on ?
1. Press the power switch to switch on the projector.
- When ’0’ is visible, the projector is switched off.
- When ’1’ is visible, the projector is switched on.
The projector starts in standby mode. The projector indication lamp is red.
Starting image projection
1. Press
Stand by
key once on the local keypad or on the remote control. (image 5-2)
The projector mode indication lamp will be green.
Or,
Press a digit button to select an input source.
COLOR
CONTRAST
PHASE
SHARPN
TINT
BRIGHTN
STANDBY
ENTER
TEXT
EXIT
PAUSE
2 1
4 3
5 6
8
0
9
7
F1
F2
F3
F4
F5
ADJ EXIT
ENTER
PAUSE
PHASE
TEXT
SHARPN
TINT
COLOR
BRIGHTN
CONTR
TREBLE BALANCE
BASS VOL
9 0
7
8
5 6
3 4
1 2
1
Image 5-2
Standby key
R5976780 GALAXY SXGA+ SERIES 14/10/2005 43