Barco G60 Series, Руководство пользователя

Страница: 44 / 64

R5910888 /00 G60 44
Image is not an even rectangle
• Perform keystone correction by pressing the “ Keystone H “ and “ Keystone V “ button on the remote control,
or using “ Screen > Geometric Correction > V. Keystone or “ H. Keystone ” from the OSD menu.
Image is reversed
• To reverse the image, enable rear projection by selecting “ Screen > Rear Projection > On ” from the OSD
menu.
The projector stops responding to all controls
• If possible, turn off the projector, then unplug the power cord and wait at least 60 seconds before
reconnecting power.
If the remote control does not work
• Check if the operating angle of the remote control is pointed within ±30° (front and back) to the remote
receivers on the projector. Make sure there are any obstructions between the remote control and the
projector.
• Check the remote batteries. Make sure batteries are inserted correctly. Replace the batteries if they are
used up.
• Ensure you have set the correct IR code to the remote control. See “ Remote Settings “ in the chapter
“ Options Menu ” , page 36.
Troubleshooting