Barco G50, Руководство пользователя

Страница: 152 / 180

R5916676 /00 G50 152
Command
Range or Explanation
Enter
[KEYG 12]
Right [KEYG 13]
Down
[KEYG 14]
Menu
[KEYG 20]
Exit
[KEYG 72]
Bright [KEYG 19]
Cont.
[KEYG 62]
Lens H(Left) [KEYG 64]
Lens H(Right)
[KEYG 65]
Focus(Up)
[KEYG 34]
Lens V(Up)
[KEYG 66]
Lens V(Down) [KEYG 67]
Focus(Down) [KEYG 35]
Keystone H(Left) [KEYG 68]
Keystone H(Right) [KEYG 69]
Zoom(Up) [KEYG 32]
Keystone V(Up) [KEYG 15]
Keystone V(Done) [KEYG 16]
Zoom(Down) [KEYG 33]
Shutter(AV Mute) [ KEYG 24]
USER 1
[KEYG 70]
USER 1
[ KEYG82]
Pattern
[KEYG 71]
Freeze can be released by menu key, exit key and direct source key.
Black Level Uart commands
Uart command could set black level from 0 to 14 area, including coordinate and bias level.
1. step 1: using “area select” command first to indicate the area to be adjusted.
2. step 2: set all value for coordinate, bias level and area enable.
3. step 3: to apply setting by command [BKLV+APLY1], the black level area will be displayed.
UART Function
Range
Default
UART
Command
Note
Area Select 0 ~ 14 0 [BKLV+ASEL*] This function can be used
when Advanced is selected
for INSTALLATION\
Geometry Correction\ Warp
Control.
Area Enable 0 ~ 1 0 [BKLV+ENAB*]
Area Top Left Coordinate X 0 ~ 1919 0 [BKLV+TLCX*]
Area Top Left Coordinate Y 0 ~ 1199 0 [BKLV+TLCY*]
Area Top Right Coordinate X 0 ~ 1919 0 [BKLV+TRCX*]
Area Top Right Coordinate Y 0 ~ 1199 0 [BKLV+TRCY*]
Area Bottom Left Coordinate X 0 ~ 1919 0 [BKLV+BLCX*]
Communication protocols