![background image](http://html1.mh-extra.com/html/barco/fsn-series/fsn-series_user-manual_3894029076.webp)
76
FSN Series • User’s Guide
3. Control Panel Orientation
Control Panel Descriptions
~
Press
WIPE
to arm the M/E for a wipe transition, using the layers
enabled in the
Next Transition Group
. The wipe can be performed
manually with the
T-Bar
, or automatically using
AUTO TRAN
.
Transition combinations are:
•
WIPE
+
BG
: Background wipe
•
WIPE
+
KEY 1
: Wipe Key 1, on or off
•
WIPE
+
KEY 2
: Wipe Key 2, on or off
•
WIPE
+
KEY 1
+
KEY 2
: Wipe Key 1 and Key 2, on or off
•
WIPE
+
BG
+
KEY 1
: Wipe background and Key 1
•
WIPE
+
BG
+
KEY 2
: Wipe background and Key 2
•
WIPE
+
BG
+
KEY 1
+
KEY 2
: Wipe BG, Key 1 and Key 2
~
The
FX TRIG
button is not available in release 1.0.
5) Cut
Press
CUT
to instantly cut to the M/E layers that are enabled in the
Next
Transition Section
. For example:
S
BG
enabled — press
CUT
to cut from
BG
to
PST
.
S
KEY 1
enabled — press
CUT
to cut Key 1 on or off.
S
BG
+
KEY 2
enabled — press
CUT
to cut from
BG
to
PST
, and
simultaneously cut Key 2 on or off.
6) Auto
Transition
Press
AUTO TRAN
to trigger an automatic transition to or from the layers enabled
in the
Next Transition Group
. The transition uses the “type” of transition enabled
in the
Effects Group
, and the M/E’s current transition rate. For example:
S
BG
+
MIX
enabled — press
AUTO TRAN
to mix from
BG
to
PST
.
S
BG
+
WIPE
enabled — press
AUTO TRAN
to wipe from
BG
to
PST
.
S
KEY 1
+
MIX
enabled — press
AUTO TRAN
to mix Key 1 on or off.
S
BG
+
KEY 2
+
MIX
enabled — press
AUTO TRAN
to mix from
BG
to
PST
, and simultaneously mix Key 2 on or off.
S
KEY 1
+
KEY 2
+
WIPE
enabled — press
AUTO TRAN
to wipe Key
1 and Key 2 on or off.
Press
AUTO TRAN
during
the transition interval to pause the transition. The
Transition LEDS
indicate the point at which the transition is paused. Press
AUTO TRAN
again to continue in the same direction. You can pause and
continue repeatedly.
WIPE
Note
Press and hold
WIPE
to display the
Wipe Menu
, which
enables you to choose wipe patterns and adjust parameters.
In Chapter 5, refer to the “
” section on page 137
for details.
FX
TRIG
CUT
AUTO
TRAN
Note
Use the
Transition Menu
to change transition rates and to
select transition curves. Remember that the M/E’s transition
rate appears in the
Transition Display
. In Chapter 5, refer to
the “
” section on page 134 for details.