![background image](http://html1.mh-extra.com/html/barco/fsn-series/fsn-series_user-manual_3894029062.webp)
62
FSN Series • User’s Guide
3. Control Panel Orientation
Control Panel Descriptions
aáëéä~ó=pÉÅíáçå
The figure below illustrates the
Display Section
:
Figure 3-3.
Display Section (with sample menu)
The
Display Section
provides the controls for adjusting system parameters, and the
display itself can be mounted in a variety of ways. In Chapter 4, refer to the “
” section on page 97 for details.
Following are descriptions of each section:
1)
Touch Screen
The high-resolution
Touch Screen
is a multi-menu user interface that enables
you to set up the switcher, adjust parameters, view status, and manage all
functions. Refer to Chapter 5, “
2) Knobs
Four
Knobs
are provided to the right of the Touch Screen. When one or more
“value buttons” appear on the Touch Screen, or when a line is drawn to a table,
the adjacent knob(s) enable you to adjust those specific parameters.
Please note:
~
Turning a knob to the right (clockwise) increases a parameter’s value, or
scrolls the highlight in a table down. Turning a knob to the left (counter-
clockwise) decreases a value, or scrolls the highlight in a table up.
~
If you adjust a numeric value using a
Knob
, you do not need to press
Enter
. Using this method, the new value is
immediately
active.
~
If you enter a numeric value using the on-screen
Keypad
or the control
panel’s
Keypad
, the
Enter
button must be pressed.
1
2
1)
2)