Barco FSN Series, Руководство пользователя

Страница: 54 / 344

54 FSN Series • User’s Guide
2. FSN-1400 Orientation
Card Descriptions
k~íáîÉ=^ìñ=lìíéìí=`~êÇ
The NAC (Native Aux Output Card) is an optional output card that provides eight additional
auxiliary outputs that run at the system’s native resolution. When installed, each additional
Aux output automatically becomes available in the
Aux Assign Section .
Refer to the “ Card Slot Allocation and I/O Flexibility ” section on page 29 for details on
NAC configurations in the FSN-1400.
The figure below illustrates the NAC ’s front edge and rear I/O connectors:
Figure 2-12. NAC front edge and rear I/O connectors
Following are descriptions of all NAC components:
1) Ejectors
Use the card’s top and bottom Ejectors to remove (and re-insert) the card.
2) Card Power LED
The Card Power LED indicates power status for the card. Refer to the “ Card
LEDs ” section on page 55 for details.
3) Loaded LED
The Loaded LED indicates the status of all FPGAs on the card. Refer to the
“ Card LEDs ” section on page 55 for details.
4) Native Aux Outputs
Eight BNC connectors are provided for the optional Native Aux Outputs .
1) Ejectors 3) Loaded LED
2) Card Power LED 4) Native Aux Outputs
Power
Loa
ded
N
a
tive
A
u
x Ou
tpu
t C
a
rd
NAC
1
1
Front Edge Rear I/O
4
2 3
1
2
3
4
5
6
7
8
SDI