Barco FSN-1004 Скачать руководство пользователя страница 196

Страница: 196 / 246

196

FSN-1004 • User’s Guide • Rev 00

6. Operations

Backing Up and Restoring the System

_~ÅâáåÖ=ré=~åÇ=oÉëíçêáåÖ=íÜÉ=póëíÉã

The following topics are discussed in this section:

•

Backing Up the System

•

Restoring the System

_~ÅâáåÖ=ré=íÜÉ=póëíÉã

The system backup procedure enables you to store the entire system setup to a PC,
including all memory registers.



Use the following steps to back up the system:

Navigate to the

System Menu

Press

{Backup and Restore}

to display the

Backup and Restore Menu

Press

{Backup System}

to display the directory window on your PC.

In the directory, navigate to the folder in which you want to store a backup file, and
select the folder. The backup data (multiple files) will be stored in that folder.

oÉëíçêáåÖ=íÜÉ=póëíÉã

The system restore procedure enables you to restore the entire system setup from your
PC, including all memory registers.



Use the following steps to restore the system:

Press

{Backup and Restore}

to display the

Backup and Restore Menu

Press

{Restore System}

to display the directory window on your PC.

In the directory, navigate to the folder from which you want to restore the system,
and select the folder.

Содержание FSN-1004























































































































































































































































Результаты поиска

Содержание FSN-1004

Отзывы:

Barco FSN-1004, Руководство пользователя, Страница: 196 / 246

Результаты поиска

Содержание FSN-1004

Отзывы: