Barco F90 - W13WUXGA, Руководство пользователя

Страница: 24 / 103

2. Getting to know the projector.
2.7.3 Functionality overview
Remote Control Unit buttons
1
Button pressed indicator.
14
Backspace (while entering
values)
2
Shutter Open.
15
XLR connector.
3
Shutter Close.
16
Decimal mark (while entering
values)
4
Touch Panel On/Off. (Not in
use).
17
Macro button. (Not in use)
5
OSD On/Off.
18
Menu Back.
6
Lens Zoom.
19
Default button. (Not in use).
7
Lens Shift.
20
Lens Focus.
8
Menu Activation.
21
Real Color menu..
9
Menu Selection, OK button.
22
Test Patterns.
10
Menu Navigation.
23
Power On.
11
Input Selection.
24
Power Off.
12
Address button.
25
Stereo Jack.
1
2
3
4
5
6
7
8
9
10
11
12
15
24
23
22
21
20
19
18
17
16
13
14
26 25
13
Numeric buttons.
26
RCU On/Off.
The projector remote control is a full feature wireless remote control, powered by two (2) standard AA batteries. The battery com-
partment is on the back side of the remote control.
The remote control is backlit for use in dark environments. It also has an Jack connector for wired connection to the projector. When
the wire is connected, the IR beam is switched off.
2.7.4 Remote control, on/off button
Purpose of the remote control on/off button
The Pulse remote control unit has at the front side an on/off switch (reference 1 image 2-8). Switching off the remote control prevents
that unwanted commands are send due to an accidental key press. Furthermore, switching the RCU off will extend the battery life
time of the remote control.
To activate the remote control press the on/off button.
To deactivate the remote control press the on/off button again.
Default when (re)placing batteries, is “ON”.
1
Image 2-8
20 601–426 F70 SERIES 24/10/2017