Barco F90-W13 Скачать руководство пользователя страница 51

Страница: 51 / 57

9. Settings menu

9. SETTINGS MENU

Overview

•

Communication

•

Apply a menu theme

•

Service

9.1

Communication

About

System settings / Communication

Current Ethernet communication information is given, and can be edited in this menu.

Default mode for Ethernet communications are: Automatic ON / IP Version 4 DHCP mode.

Setting

Description

Automatic

DHCP enabled

OFF

Static

IP version 4

Static mode

Set address, subnet maks and default gateway according to network speci

cation.

DHCP mode

Assigned IP address, subnet mask and gateway.

9.2

Apply a menu theme

About

System settings / Themes

Themes are used to apply a prede

ned functionality to the OSD display. There are two options: light (default) or dark.

9.3

Service

About

System settings / Service

The Service Menu is for service personnel and / or advanced users only.

The menu is password protected.

601–0400–00 F90–W13 18/08/2016

Содержание F90-W13


























































Результаты поиска

Содержание F90-W13

Отзывы:

Barco F90-W13, Руководство пользователя, Страница: 51 / 57

Результаты поиска

Содержание F90-W13

Отзывы: