Barco F80-Q7, Руководство пользователя

Страница: 28 / 86

4. Getting Started
The keys are equipped with white and blue backlit LEDs. Power button is equipped with white, blue and red backlit. The LEDs are
controlled according to the features available.
Remote Control Unit buttons
1
Button pressed indicator.
14
Backspace (while entering
values)
2
Shutter Open.
15
XLR connector.
3
Shutter Close.
16
Decimal mark (while entering
values)
4
Touch Panel On/Off.
17
Macro button.
5
OSD On/Off.
18
Menu Back.
6
Lens Zoom.
19
Default button.
7
Lens Shift.
20
Lens Focus.
8
Menu Activation.
21
Color On/Off.
9
Menu Selection, OK button.
22
Test Patterns.
10
Menu Navigation.
23
Power On.
11
Input Selection.
24
Power Off.
12
Address button.
25
Stereo Jack.
1
2
3
4
5
6
7
8
9
10
11
12
15
24
23
22
21
20
19
18
17
16
13
14
26 25
13
Numeric buttons.
26
RCU On/Off.
The projector remote control is a full feature wireless remote control, powered by two (2) standard AA batteries. The battery com-
partment is on the back side of the remote control.
The remote control is backlit for use in dark environments. It also has an XLR connector for wired connection to the projector. When
the wire is connected, the IR beam is switched off.
LCD panel
The LCD panel has two main functions:
1.
Showing the menus and adjustment information. and also a mirror of the OSD, (On Screen Display) described in User Interface
when this is enabled.
2. Information regarding the status of the projector showing this data:
-
Projector status
- Network address
- Active source
- Current fi rmware version
- Operation Data
- Active functions (Enabled Functions).
Toggle between the two indications by using the Menu button on the keypad, or on the remote control
The LCD Display will fade out 30 seconds after the last key operation.
4.2 Power modes
General
The table below details the F80 power modes.
24 R5906852 F80 SERIES 21/09/2017