Barco F400, Руководство пользователя

Страница: 16 / 220

R5915525 /00 Fx400 Series 16
• Special care for Laser Beams : Special care should be used when DLP projectors are used in the same
room as high-power laser equipment. Direct or indirect hitting of a laser beam on to the lens can severely
damage the Digital Mirror Devices
TM in which case there is a loss of warranty.
• Do not use this equipment near water.
• Do not operate the projector outside its temperature and humidity specifications as this may result in
overheating and malfunction.
• Never place the projector in direct sun light. Sun light on the lens can severely damage the Digital Mirror
Devices™ in which case there is a loss of warranty.
• Save the original shipping carton and packing material. They will come in handy if you ever have to ship
your equipment. For maximum protection, repack your set as it was originally packed at the factory.
• Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning. Never use strong solvents, such as thinner or benzine, or abrasive
cleaners, since these will damage the cabinet. Stubborn stains may be removed with a cloth lightly
dampened with mild detergent solution.
• To ensure the highest optical performance and resolution, the projection lenses are specially treated with
an anti-reflective coating, therefore, avoid touching the lens. To remove dust on the lens, use a soft dry
cloth. Do not use a damp cloth, detergent solution, or thinner. For lens cleaning, follow the instructions
given in the user manual.
• Only use FLC series lenses on the projector, or FLD+ / FLDX lenses with adapter. Other lenses may
damage the internal optics. See Barco website for suitable FLC and/or FLD lenses.
• Allowed ambient temperature range depends on altitude:
-
between 0 and 1500 meter altitude: ambient temperature range = 10°C (32°F) to 40°C (104°F)
- between 1500 and 3000 meter altitude: ambient temperature range = 10°C (32°F) to 35°C (86°F)
• Rated operating humidity = 20% RH to 80% RH Non-condensed.
• Rated storage humidity = 10%RH to 90%RH.
On Servicing
• Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltage potentials and risk of electric shock.
• Refer all servicing to qualified service personnel.
• Attempts to alter the factory-set internal controls or to change other control settings not specially discussed
in this manual can lead to permanent damage to the projector and cancellation of the warranty.
• Replacement parts: When replacement parts are required, confirm with the service technician, or make
sure that the service technician has used original Barco replacement parts or authorized replacement parts
which have the same characteristics as the Barco original part. Unauthorized substitutions may result in
degraded performance and reliability, fire, electric shock or other hazards. Unauthorized substitutions may
void warranty.
• Safety check: Upon completion of any service or repairs to this projector, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
Malfunctioning
• When the power cord or plug is damaged or frayed.
• If liquid has been spilled into the equipment.
• If the product has been exposed to rain or water.
• If the product does not operate normally when the operating instructions are followed. Adjust only those
controls that are covered by the operating instructions since improper adjustment of the other controls may
result in damage and will often require extensive work by a qualified technician to restore the product to
normal operation.
• If the product has been dropped or the cabinet has been damaged.
• If the product exhibits a distinct change in performance, indicating a need for service.
Safety Data Sheets for Hazardous Chemicals
For safe handling information on chemical products, consult the Safety Data Sheet (SDS). SDSs are available
upon request via safetydatasheets@barco.com.
Safety Information