Barco F400, Руководство пользователя

Страница: 138 / 220

R5915525 /00 Fx400 Series 138
Image 10–24
Back light
Defines for how long the LCD and buttons backlight will be in on state. Use the navigation arrow keys to select
and confirm the selection.
Stealth mode
The Stealth mode can be enabled via the OSD and API. Prospector can also be used when available. (Q423).
In addition, the Stealth mode can be enabled/disabled by pressing the OSD on/off button on the keypad for 5
seconds.
Use the navigation arrow keys to select, and confirm the selection.
When enabled, the backlight of the LCD and keypad buttons and the LED indicators on the back of the
projector is turned off
• Stealth mode Off: : Stealth mode is not enabled
• Stealth mode On: Stealth mode is enabled. When rebooting or upgrading SW the Stealth mode will be off
until the projector reaches Ready. This allows the user to get feedback on e.g. the progress of the SW
update
• Stealth mode On until reboot: Stealth mode is enabled until the projector is rebooted or in power
transition cycle (on/ready state to eco mode, and back again).. After a reboot the Stealth mode will be off.
The reboot can happen either from a power recycle, through the API or when upgrading SW.
10.3 Date and time
10.3.1 Date and time setup - manually
About date and time
The date and time setting can be set manually or automatically via an NTP server based on region and city
location.
Date is displayed by default as: day / month / year.
Time is displayed by default as: hour : minutes : seconds, in the 24–hour clock.
How to set manually
1. In the main menu, select Settings → Date and time .
GUI – System Settings