Barco Event Master E2, Руководство пользователя

Страница: 54 / 307

5. Front Panel Menu orientation
5.4 About Status menu
General
The Status Menu is the E2’s top-level menu, which appears by default at system startup. This menu provides system name, Unit ID,
Genlock status and E2 IP address. The following fi gure illustrates a sample Status Menu. Press the ESC button when the Setup
menu is displayed allows to return in the Status menu.
Image 5-6
Status menu
System name
Human readable name of the current E2 system. Particularly useful in the user interface when multiple E2 system are connected in
the same network.
System1 is the default value. This name can be changed in the con fi guration page of the GUI. For more details please refer to the
section dedicated to the E2 con fi guration in the chapter "Con fi guration Menu", page 76.
Unit ID
ID required to identify different units are acting as a single system in order to expand for Inputs, Outputs or Layers.
This ID can be changed in the con fi guration page of the GUI. For more details please refer to the section dedicated to the E2
con fi guration in the chapter "Con fi guration Menu", page 76.
Genlock
This line gives information about the Genlock connection situated at the back of the E2 system. For more detail on this connection
please refer to the section dedicated to the Genlock Input BNC in the chapter"Rear panel", page 32.
The user could turn Genlock OFF or ON in the con fi guration page of the GUI. E2 will determine what kind of Genlock is connected
and will update the Status fi eld. The status fi eld can say “Locked”, “Lost Lock” or “Free Run”. For more details please refer to the
section dedicated to the E2 con fi guration in the chapter "System Setup", page 157.
IP address
IP address of the E2 system in the local network.
If there is no internet connection, or if a DHCP server has not been found, the IP address is 000.000.000.000. The IP address is
needed for running the Web Interface and for connection to an external device. For more details please refer to the section dedicated
to the setting of Ethernet options in the chapter "About the System menu", page 52
50 R5905948 E2 12/12/2014