Barco EOS X Terminal, Руководство пользователя

Страница: 41 / 195

3. Getting started
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-2004
___________________________________________________________________
3-23
3.2.9 Dual RGB Input Card
The D
UAL
RGB I
NPUT
C
ARD
provides the capability of displaying RGB monitor signals. Either two analog signals up to
1280×1024@75Hz or one analog signal up to UXGA resolution or higher are digitized for further processing in E
OS
.
Standard
The synchronization modes Hsync+Vsync , Csync and Sync-on-Green are supported.
Connectors
The D
UAL
RGB I
NPUT
C
ARD
has two VGA compatible 15-pin SubMinD connectors. Each is for connecting one RGB
signal to the O
MNI
B
US
. If an UXGA signal is inserted it must be connected to RGB In 1 , while RGB In 2 is not avail-
able.
RGB In 2
RGB In 1
Figure 3-30
connector of D
UAL
RGB I
NPUT
C
ARD
Order
Within a single D
UAL
RGB I
NPUT
C
ARD
the numbering of the video channels is as shown in the figure above. The
order of the D
UAL
RGB I
NPUT
C
ARDS
in E
OS
is determined in exactly the same way as with the Q
UAD
A
NALOG
V
IDEO
C
ARD
. Refer to section 3.2.7 Quad Analog Video Card , please.
Specifications
For detailed technical specifications of the D
UAL
RGB I
NPUT
C
ARD
please refer to section 7.1 Technical data .