Barco Eonis MDRC-2321, Руководство пользователя

Страница: 18 / 38

R5910551 /00 Eonis 18
3.12 Analog video settings
The following settings are only available when an analog video input source (DVI-A) is selected.
About analog video settings
When the analog video input source is active, a number of analog video settings becomes available:
• Auto Adjust : The analog video setting will automatically be adjusted
• Geometry : Allows to manually adjust the geometry settings of the analog video (clock frequency, clock
phase, horizontal position, vertical position)
• Level : Allows to manually adjust the contrast and brightness levels of the analog video
To adjust the analog video settings
1. Bring up the OSD main menu.
2. Navigate to the Adjustments > Analog menu.
3. Adjust one of the available analog video settings as desired.
3.13 Power save mode
About power save mode
Enabling power save mode on your MDRC-2321 will optimize the display lifetime by automatically switching
off the backlight when no video signal is detected after approximately 10 seconds.
To enable/disable power save mode
1. Bring up the OSD main menu.
2. Navigate to the Adjustments > Settings menu.
3. Enter the Power save submenu.
4. Select On or Off as desired and confirm.
3.14 OSD menu language
About the OSD menu language
By default, the OSD menu comes up in English. However, there ’ s a wide range of other languages available
for the OSD menu of your MDRC-2321.
To select the language of the OSD menu
1. Bring up the OSD main menu.
2. Navigate to the Adjustments > Settings menu.
3. Enter the OSD Language submenu.
4. Select one of the available languages.
Operation