
Controller LC
Controller SC
Touch Screen Section
Used for system configuration, setup and operational adjustments,
such as PIPs and Keys.
1
1
1
2
2
3
4
4
System Keypad
Provides direct access to all system configuration, setup and
status menus.
2
Alphanumeric Keypad
(Controller LC only)
Enables you to enter and change numeric
values on the Touch Screen.
3
Joystick Section
Joystick enables you to adjust PIPs, Keys and other parameters.
Dedicated buttons allow you to change the Joystick’s function.
4
5
Machine Control Section
(Controller LC only)
Not implemented.
5
6
Console Lighting
Knobs control the brightness of the low-voltage “script” lights.
6
Preset Section
Buttons enable you to store and recall Controller setups. Each
button represents a single “look” of the overall projected image.
7
7
7
8
Destination Bus
8
9
9
Source Selection Bus
Each button represents a source that you can route to PIPs, Keys
and Aux destinations.
9
Layer Control Section
Buttons select the layer(s) that will transition to or from
Program.
Split
buttons control the “mode” of each mixer.
10
10
10
11
Layer Functions Section
Buttons in this section apply to the active (blinking) layer,
enabling you to change the layer’s mode and attributes.
11
12
12
Live Switch Section
The two
Live Switch
buttons change the function of the Source
Selection Bus, enabling you to take sources “live” to Program.
12
13
Transition Section
Includes the T-Bar for manually mixing sources, plus dedicated
buttons for cuts and auto-transitions.
13
8
14
14
Group Control Section
To simplify destination selection process, each “Group” button
can be programmed to activate one or more destinations.
14
6
11
13
15
Program Preset Section
Not implemented.
15
15
17
16
16
17
18
Layer/Aux Control
Not implemented.
16
Transition Functions
Buttons set parameters for the current transition and mode,
such as mix source, toggle, swap, move and black preview.
17
User Key Section
18
Each button selects an active destination (e.g., single screen, wide
screen, aux) to which you can route the Controller’s output.
(Controller LC only)
Each button stores PIP and Key
parameters, enabling you to copy between layers and mixers.
Encore Controller — Front Panels
1