Barco ELM Series, Руководство по установке

Страница: 8 / 13

BARCO ——————————————————— 8 ————————————— Projection Systems
Mounting the Cross Lath
What has to be
done
A cross lath has to be mounted on the rods. In case the rods run not parallel, the
rigging points have to be loosen a little.
Necessary Tools A flatblade screwdriver for M5 (No 7) and an Allen Key No 8.
Illustrations
A
B
B
A
Mounting the
cross lath
To mount the cross lath, follow the next procedure:
1
2
1&2
1
2
1&2
Slide the cross lath (A) over the rods.
Important note:
1. If the rods run not parallel, loosen a Little the 3 fixation
screws (C) of the rigging points.
2. Slide the cross lath on the rods until the top of the rods
just suits the front of the lath.
Secure the position of the lath with the 2 screws (B). Don’t
forget to fasten the rigging points again.
Step Action Image
Image 2
Image 1
C