Barco E-2320 C, Системное руководство

Страница: 26 / 104

Parts, controls and connectors
26
Parts, controls and connectors
Front
Figure 1
1. Control wheel
The control wheel can be pressed like a push button and
rotated like a knob.
It allows to put the display in stand-by, navigate through
the on-screen display (OSD) menus and change values in
the OSD.
2. USB downstream port. See also item “6.” on page 27
3. Power LED
The LED is
off
when the display is disconnected from the
power. The LED is also off when the LED function is
disabled in the on-screen display (OSD).
The LED is
green
when the display is on (when enabled in
the on-screen menus).
The LED is
orange
when the display is in Stand-by power-
saving mode.
BARCO