Barco Duet R9898140, Руководство пользователя

Страница: 9 / 20

9
Description & Specifications
Description
Application global
The Duet interface is an ACTIVE-to-PASSIVE Stereo Convertor. The interface takes the active
stereo signal from an image generator, splits it in two signals and displays them on a set of dual
stacked Stereo-optimized projectors, foreseen with the active stereo compatibility option.
As IBM and Apple computers need monitor identification for soft and hardware configuration
purposes, emulation of these identifications bits is provided in case no monitor is connected.
To obtain the best performing images on the large screen-projecting device, active loop-through
is used for the monitor output.
Specifications
Specifications Duet Interface
Measured Bandwidth: >300MHZ @-3dB
Gain fixed to 1(Output=Input)
Power Supply: Auto ranging Power Supply 100-240V AC 50/60Hz
Input signals:
R, G and B signal: 0.7Vpp (no sync) or
1Vpp with sync @75 Ohm
Sync: TTL level or Analog (Selectable
with Switch)
Output signals :
Loop through output on DD15 connector:
R, G, B:0.7Vpp (no sync) or 1Vpp
with sync @75 Ohm
Horizontal Sync: TTL or Analog (0.7Vpp)
Vertical Sync: TTL or Analog (0.7Vpp)
Composite Sync: TTL or Analog (0.7Vpp)
(Sync Output selectable with switch)
Output to projector on BNC connectors:
R, G, B:0.7Vpp (no sync) or 1Vpp
with sync @75 Ohm
DC Offset 0V
Horizontal Sync: 0.7Vpp
Vertical Sync: 0.7Vpp
Composite Sync: 0.7Vpp
Sync Input Signal Input
Sync Input Selection
Signal/Sync Output R Signal/Sync Output L
Monitor
Sync Output Selection
Power Input