Connecting Machines
DU5P : Flexible and Low Cost Data
Collection Terminal
Each knitting machine is equipped with an industrial data col-
lection terminal (data unit). This device automatically counts the
number of revolutions (production), calculates the speed and
detects automatic stops such as needle breakage, yarn break-
age, end of piece,...
As not all stops can be detected automatically, machine opera-
tors can make additional declarations by means of the data unit
keyboard. Typical declarations include call fixer, piece change,
quality change, quality check, waiting for yarn,… A display is
available for communication with the operators.
DU8P : Designed for Maximum
User Friendliness
The DU8P has been designed for a maximum flexibility and
ease of use. The large display allows the operator to view all
production and planning information.
Nine pre-defined “quick entry” keys are available for fast entry of
the most frequent stop reasons. All other data entry is conducted
through software driven function keys.
Besides count inputs and digital inputs for automatic stop detec-
tion, the DU8P is also equipped with two serial interfaces which
can be used to connect weighing scales, printers,…
Through bi-directional communication, the DU8P can stop the
machine, activate a light or any other machine function by using
one of the five relay outputs.
Touch Screen Fabric Inspection
Terminal
Mounted on the inspection table and linked with the yardage
clock, this terminal offers a Windows based Graphical User
Interface for defect entry.
The “defect codes” are shown as buttons on the screen. The
inspector enters the defect by tapping the corresponding but-
ton. Special buttons are available for running defects, cut outs,
mending, …
While inspecting, the piece map is continuously displayed on
the screen and eventual erroneous entries can be corrected on
the spot. For each inspected piece, a defect map with grade
calculation is available and sent to the central computer for
storage and reporting.