Barco DP2K-36BLP, Руководство пользователя и инструкция по установке

Страница: 23 / 185

2. General
• A metal grid can be use to protect the radiators from damage due to direct blows or falling objects and such.
1
2
Image 2-9
1 Cooler
2 Metal grid
This optional grid is delivered only in the Stand alone pack accessories. For further details, please see section
dedicated to the physical installation of the stand alone cooler.
2.3 Unpacking the projector
What has to be done ?
Upon delivery, the projector is packed in a carton box upon a wooden pallet and secured with banding and fastening clips. Fur-
thermore, to provide protection during transportation, the projector is surrounded with foam. Once the projector has arrived at the
installation site, it needs to be removed from the carton box and wooden pallet in a safe manner without damaging the projector.
After unpacking let the projector acclimatizes to a room temperature higher then 10°C (50°F) and lower then
35°C (95°F). It is suggests only using it after having stored it for 16 hours in
fi nal location. Neglecting this may
result in a start up failure of the Light Processor Unit.
Necessary tools
• 8 mm Allen wrench.
• 13 mm open end wrench.
• 17 mm open end wrench.
How to unpack
1. Loosen the banding by pulling the free end of the banding loop in the clip.
Take off the box cover.
R5906753 DPXK BLP SERIES 20/11/2017 19