Barco DP2K-23B, Руководство по установке, Страница: 125 / 137

12. Convergence
12.4 Red on blue convergence
Necessary tools
No tools.
Converging the RED pattern onto the BLUE pattern
Start with aligning the RED DMD in the vertical directions [1] and [2] and then proceed with the horizontal direction [3]
1. To translate RED vertically in the Y + direction, turn both [1] and [2] clockwise. Turn screws in equal increments.
2. To translate RED vertically in the Y - direction, turn both [1] and [2] anti-clockwise. Turn screws in equal increments.
3. To translate RED horizontally in the X + direction, turn [3] clockwise.
4. To translate RED horizontally in the X - direction, turn [3] anti-clockwise.
5. For clockwise rotations of RED, turning [1] anti-clockwise would generally suf fi ce. If much rotation is required, [2] may also be
turned in the opposite direction. Slight corrections to Y may be required after rotation.
6. For anti-clockwise rotations of RED, turning [1] clockwise would generally suf fi ce. If much rotation is required, [2] may also be
turned in the opposite direction. Slight corrections to Y may be required after rotation.
2
3
1
1
1
1
Red
Image 12-7
Red on blue convergence
R59770495 DP2K-23B 30/04/2010 119