Barco DP2K-19B, Руководство по установке

Страница: 39 / 125

4. Lamp & Lamp House
6. Gently remove the xenon lamp together with the anode socket out of the Lamp House. Do not use excessive force upon the
xenon lamp. Normally the xenon lamp will easily slide out the cathode socket of the Lamp House.
Warning: Supporting the xenon lamp with one hand while pulling it out with other hand prevents it from bumping against the
chassis of the Lamp House.
Image 4-11
7. Place the xenon lamp in its protective container or wrap the xenon lamp in a protective cloth and secure with two binders.
Image 4-12
Left: Xenon lamp wrapped in a protective cloth. Right: Xenon lamp captured in a protective container.
8. Remove the anode wire lug (reference 6 image 4-13) from the anode socket as illustrated. Use a 8mm Allen wrench.
Tip: Place the fl at washer and bolt (reference 7 & 8 image 4-13) back on its place after the lug is removed.
6
7
8
Image 4-13
R5905067 DPXK-19B/23B/P 17/09/2012 33