Barco DML-1200, Руководство пользователя

Страница: 90 / 113

13. Servicing
C
AUTION
:
Never attempt to disassemble the lamp from its housing or to dispose of it. Due to its high internal
pressure, the lamp may explode in either hot or cold states if improperly handled. For recycling guidelines,
see "Recycling guidelines", page 6.
C
AUTION
:
Never touch the re fl ector or the lamp bulb with your fi ngers. That will reduce the lifetime of the
lamp.
Never touch the UV fi lter when a lamp is removed.
Necessary tools
No tools.
How to insert a lamp unit
1. Insert the lamp vertically into the housing, with the front of the lamp facing the middle of the head. Insert the lamp completely.
Image 13-23
Mounting a lamp
2. Rotate the fi xation handle and close it. Push until it clicks.
3. Insert the cable connector into the lamp unit socket.
Starting up the lamps is only possible if all lamps are correctly mounted in the projector head.
13.11 Top-up the reservoir with cooling liquid
Access to the reservoir
1. Unplug the device from the power outlet.
2. Standing at the tilt lock side, turn the head horizontally until the lens is pointing to the left.
86 R59770208 DML-1200 06/11/2009