Barco DCS-200, Руководство пользователя

Страница: 48 / 170

48 DCS-200 • User’s Guide
4. Operation
Using the Setup Menu
Following are descriptions of each Output Menu function:
•
Output Format
•
Test Pattern
•
Sync Setup
•
Gamma
•
Save Output Config
lìíéìí=cçêã~í
From the Output Menu , select the top Output Format line to view or change the current
output format. This line indicates the format in the following form:
Hact x Vact @ Vr Hz
The output format for the DCS-200 can be set to any of the progressive outputs in the
format table. In Appendix A, refer to the “
Format Table ” section on page 122 for details.
qÉëí=m~ííÉêå
From the Output Menu , select Test Pattern to display the Test Patterns Menu :
Figure 4-13. Test Patterns Menu (sample)
The following functions are available on the menu:
•
Mode — This function enables or disables the test pattern generator.
•
Type — This function enables you to select a test pattern. Available choices are:
Note The output format is not updated until SEL is pressed.
T E S T P A T T E R N S
> M o d e
O N
T y p e B u r s t
R a s t e r B o x O F F
~
H Ramp
~
V Ramp
~
100% Col Bars
~
75% Col bars
~
16 x 16 Grid
~
32 x 32 Grid
~
Burst
~
50% Gray
~
Gray Steps 1
~
Gray Steps 2
~
Red
~
Green
~
Blue
~
White
~
Black