Barco DCS-200, Руководство пользователя

Страница: 21 / 170

DCS-200 • User’s Guide 21
2. Hardware Orientation
DCS-200 Front Panel
aáëéä~ó=pÉÅíáçå
The figure below illustrates the Display Section :
Figure 2-2. Display Section with sample Status Menu
Descriptions of each button and control are provided below:
•
The Menu Display is a 4-line x 20-character Vacuum Fluorescent Display (VFD)
that shows all DCS-200 menus and sub-menus. Brightness is adjustable. The
following illustration shows a typical DCS-200 menu.
Figure 2-3. Sample Setup Menu Display
For all setup menus, please note:
~
The top line names the current menu, in all capital letters.
~
The navigation cursor ( > ) in the left-hand column indicates the current
line on which action can be taken.
~
The double arrow ( >> ) indicates that a sub-menu is available.
In Chapter 4, refer to the “ Menu Tree ” section on page 38 for additional details on
the system’s menu tree.
•
ADJUST — use the Adjust Knob to scroll through all system menus.
~
Turn the knob counter-clockwise ( CCW ) to scroll down.
~
Turn the knob clockwise ( CW ) to scroll up.
•
SEL — press to enter the setup menu tree (from the Status Menu) , to enter a
sub-menu, change a parameter, accept a parameter, or to answer “ Yes ” to certain
menu queries.
S E T U P M E N U
> T r a n s T i m e
1 . 0
O u t p u t > >
P r e v i e w > >
Adjust
SEL
ESC
PROGRAM:
NEXT:
RGB
1024x768 @59.94
SDI
NTSC (480i)
Note The Status Menu layout is different from the “setup” menu
display. In Chapter 4, refer to the “ Status Menu ” section on
page 44 for details.
SEL