www.barco.com
Front Panel
Rear Panel
Barco Media and Entertainment
11101 Trade Center Drive Rancho Cordova, CA 95670
Tel. 916 859 2500 Fax 916 859 2515
31-XXXXXXXXXX-00 Apr 08
Any item contained in this datasheet may change without notice.
3: Effects Section
FRZ:
Instantly freezes the current image that is on program.
BLK:
Transitions program to black.
KEY:
The key source will transition to/from program, after the TAKE
button is pressed.
4: TAKE
Transitions the selected source or KEY to Program.
1: Display Section
Four (4) line VFD Display
Menu navigation via rotary encoder knob, Select/Escape buttons
2: Inputs Section
Ten buttons select the corresponding input source, or the stored LOGO
image, to be placed on program after the TAKE button is pressed.
•
•
•
•
•
1
2
3
4
5
6
8
7
1-3: Input Connectors
Supports YPbPr and RGBHV
10-bits/color sampling at maximum 170 MHz
True pixel mapping (1:1) for signal resolutions up to 1600x1200@60
Hz. Sources with higher pixel rates (1920x1080p@60, 1920x1200@60
and 2048x1080p@60) are also supported.
1: Six Analog Inputs via HD-15 VGA connectors
SD SDI per SMPTE 259M-C (NTSC/PAL resolution)
HD SDI per SMPTE 292M (HDTV)
3: Serial Digital Input (HD/SD SDI) via BNC connector (optional)
4: Main Output Connectors
Program output in digital format on the DVI-I connector and in analog
format on the HD-15 connector.
Progressive resolutions at RGBHV.
HDCP Encryption support for DVI signals.
•
•
•
•
RJ-45 connector for 10/100Base-T Ethernet communications
5: Ethernet
•
Selectable output in digital format on the DVI-I connector and in
analog format on the HD-15 connector.
6: Preview Output Connectors
•
DB-9 connector for communicating with external serial devices.
7: Serial RS-232
•
Input Power: 100-240 VAC, 47-63 Hz; Auto-Ranging
240 watts maximum
8: AC Power
•
•
•
•
8-bit digital input per DDWG 1.0 with HDCP support.
RGBHV data via analog pins of the DVI-I connector.
The digital source will be processed if valid DVI signals are detected.
The Analog source can be selected via the front panel menu.
2: Two Digital or Analog Inputs via DVI-I connectors
•
•
•
•
•
Program DVI
1920 x 1080p
Preview RBGHV
1024 x 768
DCS-200
Main Program output is connected to the projector at 1080p;
Preview connected is sent to a confidence low-res XGA monitor.
Program and preview output resolutions are different.
Application 1
Program DVI
1600 x 1200p
Preview DVI
1600 x 1200
DCS-200
Application 2
Input adjustments are made by viewing the source on the
preview monitor, before is transitioned to the program output.
Program and preview output resolutions need to be the same.