Barco DCINE PREMIERE DP30, Руководство по установке

Страница: 11 / 47

2. Packaging and Dimensions
2. PACKAGING AND DIMENSIONS
Overview
• Box Content
• Projector Packaging
• Lens Packaging
• Projector Dimensions
2.1 Box Content
Content
• 1 projector DCine Premiere DP30
• 1 anamorphic lens holder kit for single lens
2
• 1 complete lamp housing with lamp
3
• 1 European and 1 Amerivan power cable
• leveling feet
• 1 installation guidelines
• 1 touch panel owners manual (if touch panel option is installed)
2.2 Projector Packaging
Any damage discovered should be reported to the transportation company at once for inspection and filing
of claim.
Way of packaging
The projector is packed in a carton box. To provide protection during transportation, the projector is mounted between two wooden
boards and surrounded with foam. On top of the upper wooden board you will find two small boxes with an anamorphic lens kit,
manuals and cables.
To unpack
1. Release the fastening clips.
2. Remove the banding. Handle as shown in the drawing. (image 2-1)
3. Take off the carton box. (image 2-2)
4. Remove the upper palet by removing the side cover (A), taking off both small boxes (B & C) and removing the wooden board
(D). Take off the intermediate cover (E) and take off the side cover of the projector. (image 2-3)
5. Take the projector from the wooden palet. (image 2-4)
6. Remove the 3 feet from the wooden board. Therefore, turn out the the black adjustable part first and then turn out the bold
securing the foot socket to the wooden board. (image 2-5)
7. Turn the projector upside down on its 3 feet.
8. Remove the upper wooden board by removing the 3 bolts. (image 2-6)
9. Mount the 3 feet in the same holes as those of the removed wooden board. Use the 3 screws and washers which are provided
inside the manual & cable box. Do not use the screws which are fixing the feet to the wooden board.
2. dual lens holder optional
3. Lamp is delivered in seperate box
R5976572 DCINE PREMIERE DP30 17032003 7