Barco Coronis Fusion 6MP, Руководство по началу работы

Страница: 51 / 80

Driver and Software Installation
51
• After you have installed the Barco display controller(s) for
your B
ARCO
C
ORONIS
F
USION
6MP Display System in your system
for the first time.
• After you have reinstalled or upgraded your operating system.
• When you upgrade to a newer version of the MXRT driver.
Note:
You do not need to manually uninstall an existing driver
before updating to the current version. The Barco Product
Installation Wizard will detect any prior installations and start
the uninstallation process automatically if necessary.
Note:
When there is a non-Barco board in the system, we
recommend that you first install the driver for the non-Barco
board, prior to installation of the Barco driver. After each driver
installation, you should reboot the system, before proceeding
with installation of another driver.
1.
Start your system. If you have a fresh OS installation, the OS will
automatically install an ATI driver (Windows 7 inbox driver) for
the Barco MXRT Graphics Card(s). When the OS prompts you to
restart your computer, click yes, to allow the automatic driver
installation to complete, and reboot the system.
2.
Launch the Barco Product Installation Wizard. The installation
Wizard should start automatically when you insert the Barco
Display System Installation DVD into your computer's DVD drive.
If the installation does not start, in the "auto play" window, click
Run setup.exe.
3.
If a previous installation of MXRT driver is present, the
installation wizard will detect it and guide you through the
uninstallation process if necessary.
4.
By default, choose the Express Install option. The Master installer
will install the following components:
a)
BMSE
b)
QAWebAgent
c)
Graphics Driver