Barco Coronis 3MP LED MDCG-3221, Руководство пользователя

Страница: 37 / 56

K5902060 /09 Coronis 3MP LED Display
37
5.1 Replacing the protection buffer
How to replace the protection buffer
1. Place the display on a stable surface.
2. Put the display in the lowest position and fasten the height mechanism, see “ Unlocking the height
mechanism ” , page 10.
3. Very important: Tilt the panel away from the foot before changing the orientation.
4. Turn the panel counterclockwise to put the panel in landscape orientation, see “ Adjusting the display position ” ,
page 10.
5. Place the connector compartment cover in the protection buffer.
6. Slide the protection buffer over the foot of the display.
7. Tilt the panel back to the foot.
Image 5-2: Placing the protection buffer.
5.2 Repacking your display
How to repack your display
1. Place the empty bottom box on a stable surface.
2. Place the bottom buffer in the box.
3. Put the display together with the protection buffer (see “ Replacing the protection buffer ” , page 37) in the
dedicated cavity of the bottom buffer.
Repackaging instructions