Barco Coronis 3MP LED MDCG-3221, Руководство пользователя

Страница: 10 / 56

K5902060 /09 Coronis 3MP LED Display
10
2.1 Unlocking the height mechanism
To remove the clip:
1. Position the display with its rear side facing you.
2. Pull the red clip out of the fixation hole in the foot.
Image 2-1
3. Keep the clip in the dedicated hole in case the display needs to be shipped later.
2.2 Adjusting the display position
To adjust the display position
1. Stand at the front side of the panel and take the panel at both sides.
2. Very important: Tilt the panel upwards before changing the orientation.
Image 2-2
3. To change from portrait to landscape, turn the panel counterclockwise.
4. To change from landscape to portrait, turn clockwise.
If, after installing the display of the system, you change the panel orientation while an image is on
the screen, the result depends on the graphic board and the resolution of the image. In some cases
the image will be rotated automatically, in other cases it will not be rotated (e.g., when pixels would
be lost after rotation). If necessary, change the image resolution in the display control panel and
restart the system after changing the orientation.
Display installation