Barco ClickShare, Руководство по установке

Страница: 42 / 53

5. Configuring ClickShare
The bottom of this page contains important status information such as proper functioning of all processes on the Base Unit and
system temperatures.
3. If desired, click Restart System to restart or click Shutdown System to shut down.
Consulting Buttons information
The Buttons tab page of the web interface gives information on the Buttons that have been paired to the Base station.
To get information on the Buttons paired to the Base
1. Go to the ClickShare web interface.
2. Click the Maintenance tab and click Buttons .
The Buttons tab page is displayed.
Image 5-13
The list gives an overview of the Buttons that have in the past been paired to this Base Unit. If a Button has in the meantime
been paired to another Base Unit, it will still appear in this list. To remove it from the list, at the right of the tab page, click
More
and select Remove from list .
In the overview of paired Buttons, for each Button that has been paired to this Base Unit, you will fi nd:
- whether or not the Button is connected to the Base Unit
- the speci fi c serial number
- the date the Button was last connected
- the status
Status indication
Explanation
OK Button fi rmware and software are up to date. The Button has been paired to the Base Unit.
WARNING Button fi rmware version differs from the Base Unit fi rmware version, but the Button can still be
used. Pairing the Button is advised.
ERROR The Button needs to be paired to the Base Unit again before using it. The Button fi rmware version
is incompatible with the Base Unit fi rmware version.
3. To get more information on the Button fi rmware, the number of connections and the MAC address, click More... .
32 R5900004 CLICKSHARE 21/08/2012