Barco ClickShare Present C Series, Руководство по установке

Страница: 99 / 120

99 R5900103 /00 C-10, C-5
ClickShare Base Unit and Buttons into the corporate network. Since most companies are using Microsoft
Windows Server and its active directory (AD) to manage users and devices our SCEP implementation is
specifically targeted at the Network Device Enrolment Service (NDES) which is part of Windows Server 2008
R2 and Windows Server 2012. Initial support for other generic servers is available by extending the possible
parameters to use for NDES/SCEP enrolment.
Image 6 – 40 Buttons, EAP-TLS, SCEP
SCEP ServerIP/
hostname This is the IP or hostname of the Windows Server in your network running the NDES
service. By default HTTP is used.
E.g.: http://myserver or http://10.192.5.1
SCEP User name This is a user in your Active Directory which has the required permission to access the
NDES service and request the challenge password. To be sure of this, the user should
be part of the CA Administrators group (in case of a stand-alone CA) or have enroll
permissions on the configured certificate templates.
SCEP Password The corresponding password for the identity that you are using to authenticate on the
corporate network. Per Base Unit, every Button uses the same identity and password
to connect to the corporate network.
Click Save Changes to save the settings.
6.28 Buttons, External access point, mode EAP-
TTLS
How to fill out the settings
1. Fill out a Corporate SSID .
Image 6 – 41 Buttons, External access point, mode EAP-TTLS
The SSID of your corporate wireless infrastructure to which the ClickShare Buttons will connect.
C-10, C-5 Configurator