Barco CineVersum 120, Руководство пользователя

Страница: 35 / 43

8. Lens and Lamp manipulations
8. LENS AND LAMP MANIPULATIONS
Overview
• Lens adjustment
• Lamp
8.1 Lens adjustment
Lens
Your projector is equipped with a zoom lens which is remote controlled. Also the focus of the lens can be adjusted via remote control.
Shifting the image up - down or left - right is possible.
The installation menu can be password protected. Consult the installation manual for further instructions.
Overview
• Access to controls
• Focus adjustment
• Horizontal shift
• Vertical shift
• Zoom
8.1.1 Access to controls
Access to the Lens adjustments via the Remote control
1. Enter the adjustment menus by pressing
ENTER
or
ADJ
.
The general menu will be displayed. (menu 8-1)
2. Use the up or down arrow keys to select
Installation
and press
ENTER
to select.
The
Installation
menu will be displayed. (menu 8-2)
3. Use the up or down arrow keys to select
Display list
and press
ENTER
to select.
The
Display list
menu will be displayed. (menu 8-3)
4. Use the up or down arrow keys to select the display you want to adjust. E.g. projector 1. Press
ENTER
to select.
The selected display menu will be displayed. (menu 8-4)
5. Use the up or down arrow keys to select
Lens
. Press
ENTER
to select.
The
Lens
menu will be displayed. (menu 8-5)
Cine VERSUM System
Image Settings
Advanced Settings
Installation
Service
1 NO MODULE
2 NO MODULE
3 VIDEO [VIDEO]
4 NO MODULE
5 NO MODULE
6 NO MODULE
7 RGB-YUV [RGB]
8 NO MODULE
Shutdown
Back
Menu 8-1
Installation
Input slots
File service
Display list
Internal pattern
When no signal
Source transition
OSD Configuration
Language
Keystone
Global keystone: Yes
Output: [Largest]
Default input balance
Back
Menu 8-2
Display List
Plasma 1
Plasma 2
Projector 1
Projector 2
Back
Menu 8-3
Display settings
Switch OFF
Display Info
Rename
IR address: 9
Diagnosis
Orientation
Test Patterns
Lens
Lamp
Back
Menu 8-4
R5976667 CINEVERSUM SYSTEM 01102003 31