Barco CineVERSUM 110 R9010120, Руководство пользователя

Страница: 97 / 135

12. Image Files Menu
4. Use ↑ or ↓ to select
Edit.
5. Press ENTER.
A dialog box is displayed. (image 12-4)
6. Use ↑ or ↓ to select the desired file.
Note: If in PiP mode the cursor is placed by default on the active file which has the focus.
7. Press ENTER to confirm.
A dialog box is displayed with the selected source settings. (image 12-5)
8. Use ← or → to edit and change the values.
Note: greyed out fields can not be updated (total pixels).
9. Press ENTER to confirm.
Image 12-3
Edit custom file
Video625.c01
Video625.c02
Active files:
Video625.c01
Image 12-4
Edit custom file
Name
Horizontal:
Vertical:
680
20
0
560
8
576
720
Advanced
Video625.c01
pixels
pixels
pixels
pixels
lines
lines
lines
Image 12-5
It is recommended to use the default values.
12.4.2 Correct file parameters
What is already available during start up ?
During the installation of a file with LOAD, the horizontal period, the total number of vertical lines and the interlaced mode are
automatically measured and filled in. These values will be available when starting up the EDIT procedure of an active file.
R5976697 CINEVERSUM™ 110 06012004 93