Barco CineVERSUM 110 R9010120, Руководство пользователя

Страница: 103 / 135

13. Display Setup
13. DISPLAY SETUP
Overview
• Full screen representation
• Startup screen
• TextBox
• Take screenshot
• Menu bar position
• Status bar position
• Sliderbox position
• Installation menu
13.1 Full screen representation
Purpose of the Full screen representation
The
Full screen representation
function forces to use the complete native resolution of the DMD panels independently of the native
resolution of the source.
How to enable/disable the full screen representation ?
1. Press MENU to activate the menu bar.
2. Press → to select the
Display setup
item. (image 13-1)
3. Press ↓ to pull down the Display setup menu.
4. Use ↑ or ↓ to select
Full screen representation.
5. Press → to pull down the menu.
6. Use ↓ or ↑ to select
ON
or
OFF
.
On Full screen representation is active. The source resolution will be re-scaled to fill the complete screen.
Off The will be displayed with chosen aspect ratio.
7. Press ENTER .
Image 13-1
The
Show native resolution
function in
Image
, on the other hand forces to use the native resolution of the
source. The Show native resolution function overrules the Full screen representation function.
13.2 Startup screen
What can be done ?
When the startup screen is enabled, the identification screen is displayed for a few seconds at startup.
R5976697 CINEVERSUM™ 110 06012004 99