Barco CINE7 R9010040, Руководство по установке

Страница: 25 / 35

5. Installation Adjustment
Entering the Password with the RCU
The Password contains 4 digits, when the projector asks to enter your password:
1. Enter the digits with the numeric keys on the RCU (e.g.: 2319).
For each digit entered, a ’X’ appears on the screen under the displayed text ’enter password’ (menu 5-7)
enter password
XXXX
Menu 5-7
Entering the password with the local keypad.
1. Select with the cursor keys to select the first digit of your password and press ENTER . (menu 5-8)
2. Continue in the same way for the other digits.
COMPOSE PASSWORD
????
7 8 9
4 5 6
1 2 3
0
Select with
↑
or
↓
←
or
→
then <ENTER>
<EXIT> to return
Menu 5-8
When the password is correctly entered, all other password protected items are accessible without reentering
the password. When reentering the adjustment mode, it will be necessary to enter your password again when
selecting a password protected item.
When the password is wrong, the error message “Wrong Password !!!” will be displayed.
5.4 Overview Installation mode
Overview
• Scheimpflug adjustment
• Optical lens focusing
• Raster centering
• CRT Projection Angle adjustment
5.5 Scheimpflug Adjustment
Range of the scheimpflug adjustment
The scheimpfug correction can be adjusted separately for the three tubes within 3 ranges:
• Range 1 : 1.4 m (55") to 1.9 m (75"), optimum screen width 1.4 m (55")
• Range 2 : 1.9 m (75") to 3.2 m (126"), optimum screen width 2.4 m (94")
• Range 3 : 3.2 m (126") to 6 m (236"), optimum screen width 4 m (157")
A correct scheimpfug setting gives the possibility to focus the lenses for a sharp image in all screen areas.
To change the setting from one range to another, some mechanical actions have to done.
R5976585 BARCO CINE7 26022003 21