Barco CINE7 R9010040, Руководство по установке

Страница: 24 / 35

5. Installation Adjustment
Image 5-1
5.2 Starting up the Installation Adjustment Mode
How to Start Up the Installation Adjustment Mode?
1. Push the cursor key
↑
or
↓
to select Installation and press ENTER to select. (menu 5-5)
A warning will be displayed on the screen. (menu 5-6)
2. In case you are a qualified and authorized service person.
Press ENTER to start up the first step of the installation mode: Projector Position.
When entering the installation mode the projector will automatically switch to the internal pattern.
When the password mode is active you will be requested to enter the 4 digit password.
If no, Press
EXIT to return.
ADJUSTMENT MODE
Select a path from below :
IRIS
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 5-5
WARNING
RISK OF ELECTRICAL SHOCK
NO USER ADJUSTABLE PARTS
INSIDE
THE FOLLOWING INSTALLATION
MENUS ARE RESERVED TO, AND
TO BE PERFORMED ONLY BY
BARCO PERSONNEL, OR BARCO
AUTHORIZED DEALERS
If qualified, press
<ENTER> to continue, or
if not, <EXIT> to return
Menu 5-6
5.3 Password Protection
Password Protection
Some items in the Adjustment Mode are password protected. While selecting such an item, the projector asks to enter your pass-
word.
Password Protection is only available when the password strap on the controller module is on. Contact a
Barco authorized technician when no password is requested during the adjustment procedure and Password
Protection is desired.
20 R5976585 BARCO CINE7 26022003