![background image](http://html.mh-extra.com/html/barco/cine-versum-60/cine-versum-60_owners-manual_473935010.webp)
OVERVIEW OF USER’S CONTROLS
2. OVERVIEW OF USER’S CONTROLS
Overview
•
Projector
•
Remote
Control
•
Remote Control Operation
2.1 Projector
Top View
The top side of the projector is provided with the following controls:
Image 2-1
Projector controls
Controls function description
Ref
.
Function
Description
1
Infrared receiver
Infrared reception diode for the IR signals from the IR transmitter. Allows
switching On/Off (Standby) of the projector.
2
Infrared reception LED indicator
Lights up when a valid IR signal from the remote control has been captured.
3
Standby LED
Lights up continuously: projector in operation mode.
Lights up repeatedly 2 times short, 1 time long, off: projector in standby
mode.
Blinks fast: projector in cooling down mode after switching off (duration 1
min.).
Lights up repeatedly 1 time long, 1 time short, off: projector has been started
up in cooling down mode, waiting for lamp ignition.
4
Main power switch
Button pressed, switches the projector in ’standby’ mode. This mode is
indicated by the standby LED which lights up repeatedly 2 times short, 1
time long, off.
Table 2-1
2.2 Remote Control
Top side
The Infrared remote control buttons support the following functionality:
Buttons that are not labeled in the following remote control illustration have no function.
R5976691 CINE VERSUM 70/60 24112003
5