Barco BarcoRLM G5, Руководство пользователя

Страница: 72 / 165

8. Image Menu
6. Use ↓ or ↑ to select
Phase
.
7. Press ENTER .
A slider box appears.
8. Use ← or → to change the Phase and refine the jitter.
Or,
click in the input box and enter the desired value with the numeric keys.
Note: Don’t mix up with wrong number of total pixels. If the jitter doesn’t disappear with the phase adjustment, check the total
number of pixels. (Best image = pixel on pixel off pattern. For example: shut down screen of a PC)
Image 8-10
8.2.8 Noise reduction
About Noise reduction
Reduces noise and pixel jitter in all video sources.
How to change the Noise reduction ?
1. Press MENU to activate the menu bar. (image 8-11)
2. Press → to select the
Image
item.
3. Press ↓ to pull down the
Image
menu.
4. Use ↑ or ↓ to select
settings
.
5. Press → to pull down the menu.
6. Use ↓ or ↑ to select
Noise reduction.
7. Press ENTER .
A slider box appears
8. Use ← or → to change the noise level.
The higher the value, the higher the noise reduction.
Or,
click in the input box and enter the desired value with the numeric keys.
68 R5976629 BARCORLM G5 02/06/2006