Barco BarcoRLM G5, Руководство пользователя

Страница: 27 / 165

3. Connections
3.3 5-Cable input
Input specifications
The 5-cable input section is made of 5 BNC input terminals.
0.7 Vpp ± 3dB
75 Ω terminated
TWO WAY
HARDWIRED REMOTE
2 1
3
PUSH
R/PR G/Y B/PB Hs/Cs Vs VIDEO
SDI
IN
SDI
OUT
S-VIDEO
R.C.
10 BASE-T
DVI ANALOG RGB RS 232 C
Image 3-3
5-cable input
Component Video
In Component Video the term component describes a number (3) of elements that are needed to make up the video
picture, these components are R-Y/Y/B-Y. A composite video signal on the other hand contains all the information
needed for the color picture in a single channel of information
Which signals can be connected ?
Signals/Input BNC R G B H V
RGBHV R G B H V
RG
s
B
1
R G
s
B
- -
RGBS
1
R G B S
-
Component
PR Y PB
- -
Beside the standard RGB, component and sync signals, the extended mode of the 5 Cable input makes pro-
cessing of additional signals possible.
How to select a source on the 5 cable input ?
1. Press 1 on the RCU
Note: Another way for selecting this input is via Source on the local keypad or via the Menu
Component Video signals (PR/Y/PB)
Some interfaces use progressive output signals with a double line frequency of 32 kHz. The video decoder
used for the video signals is not appropriate for these signals since it can only handle 15 kHz signals. This
signal has therefore to be internally redirected, this is done in the
Source selection
menu by selecting
Data on
BNC’s
instead of
Component video
and by selecting
Pr/Y/Pb
in the advanced settings of the
Image file
menu.
1. data or video
R5976629 BARCORLM G5 02/06/2006 23