Barco BarcoRLM G5 Скачать руководство пользователя страница 112

Страница: 112 / 165

12. Image Files Menu

Image 12-4

The Auto Image setup in the

Display setup

menu affect only Auto Image if it is launched via the RCU key or at

automatic file creation.

Launching AutoImage via the menu involves complete checking of all parameters.

Auto Image can also be launched via the RCU with the dedicated AutoImage key.

12.6 Edit file

Overview

•

Editing a file

•

Correct file parameters

•

Advanced video settings

•

Advanced Data settings

12.6.1 Editing a file

What can be done with the Edit file menu ?

The Edit file menu makes it possible to adapt the settings of the file according to the real settings of the connected source. Consult
the source specifications before entering the data.

How to edit a file ?

1. Press

MENU

to activate the menu bar.

2. Press

→

to select the

Image files

item. (image 12-5)

3. Press

↓

to pull down the

Image files

menu.

4. Use

↑

↓

to select

Edit.

5. Press

ENTER.

A dialog box is displayed. (image 12-6)

6. Use

↑

↓

to select the desired file.

Note:

If in PiP mode the cursor is placed by default on the active file which has the focus.

7. Press

ENTER

to confirm.

A dialog box is displayed with the selected source settings. (image 12-7)

8. Use

←

→

to edit and change the values.

Note:

greyed out fields can not be updated (total pixels).

9. Press

ENTER

to confirm.

108

R5976629 BARCORLM G5 02/06/2006

Содержание BarcoRLM G5






































































































































































Результаты поиска

Содержание BarcoRLM G5

Отзывы:

Похожие инструкции для BarcoRLM G5

Бренды по названию

Популярные бренды

Barco BarcoRLM G5, Руководство пользователя

Результаты поиска

Содержание BarcoRLM G5

Отзывы:

Похожие инструкции для BarcoRLM G5

Бренды по названию

Популярные бренды