Barco BARCOIQ GRAPHICS 200L, Руководство пользователя

Страница: 55 / 125

6. General Menu
Image 6-4
The countdown time can be set in a dialog box in a range from 180 to 3600 seconds (default value = 300). The Timer can also be
disabled.
How to enable the timer ?
1. Press MENU to activate the Toolbar
2. Press
→
to select General
3. Press
↓
to Pull down the General menu
4. Use
↑
or
↓
to select Standby Timer (image 6-5)
5. Press ENTER to activate the function
On the screen appears a dialogbox (image 6-6)
6. Use
↑
or
↓
to select Enabled, a box surrounds the selected item, press ENTER to activate
7. Use
↑
or
↓
to browse to the input field
8. Use
←
or
→
, the numeric keys on the remote or the keypad to change the countdown setting
9. Press MENU or BACK to exit or to go back to the previous menu
Image 6-5
Image 6-6
6.5 Audio (Optional)
Overview
• Audio Setup
• Audio Settings
6.5.1 Audio Setup
What can be done ?
Layer 3 allows the input of 4 audio signals, each of them can be linked to the corresponding (video or data) source signal. it is also
possible to link multiple audio signals to one video (or data) source signal, this can be useful in case of teleconferencing.
The configuration has to be done in the Audio Setup menu
R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002 49