Barbieri TracMow 70 E POWER, Руководство оператора, Страница: 20 / 50

SICUREZZA
19
4 - CONTROL COMPONENTS
SECTION 4 - COMPONENTS AND CONTROLS
4.3 MOWER DECK
The cutting deck has a special shape to reduce the power
requirement. The knife is driven directly from the motor
via a belt that is connected to an electromagnetic (EM)
clutch.
The knives are activated with a button on the remote
control and electronically controlled. The blades used
are a compromise between cutting results and impact
resistance to enable heavier work. The knives and knife
fastening screws as well as the chains and rubber guards
on the mower deck are SAFETY COMPONENTS and
must be checked regularly (see maintenance program in
section 7.2.1.) The cutting height can be set directly via
the remote control. For maintenance of the blade see
chapter 7.2.4.
4.4 ELECTRIC SYSTEM
The machine is driven electrically. 4 microprocessors
control the functions of the machine to ensure maximum
safety at all times. A powerful Battery provides a voltage
of 48 V (Extra Low Voltage - ELV), which is safe from
electrical hazards for people. The tracks are driven by
2 brushless motors that are electronically controlled by
2 inverters that run sophisticated software that makes
the machine easy to use and flexible. The radio receiver
and the fuse and relay box are easily accessible via the
switch cabinet on the back of the machine (Fig. 7a). The
electrical system has protection class IP 54.
4.5 BEACONNET
The machine is equipped with a coloured flashing light
that can easily warn the operator over the status of the
machine: on, off, alarm, danger, PTO on, power steering,
etc.
This simple tool is very effective and convenient for the
operator who receives information simply by watching the
machine in motion. (See pic. 11, section 5)
Fig. 9