background image

A-4

Type of Food

Beef

Lamb

Veal
Pork
Chicken
Duck
Fish
Turkey,  under  16  pounds
Turkey, over  16 pounds

How Cooked

Rare
Medium
Well  done

Medium
Well  done

Approximate Cooking Times

18  minutes  per  pound
23  minutes  per  pound
27  minutes  per  pound

18  minutes  per  pound
23  minutes  per  pound

27  minutes  per  pound
30-33  minutes  per  pound
20-25  minutes  per  pound
25  minutes  per  pound
10  minutes  per  pound
20-25  per  pound  +  30  minutes
18-23  per  pound  +  15  minutes

An Important Note About Heat Settings

The  suggested  heat  settings  shown  are  approximate.  There
are  many  factors  such  as  outside  temperature,  wind  condi-
tions  and  grill  location  that affect  your  grill  performance.  We
offer these cooking times as general guidelines, but suggest
you watch the temperature gauge and adjust the heat accord-
ingly.

Preparing to Roast

Roasting  uses  the 

indirect  cooking

  method.  Therefore,  the

food should be placed on the left or right side of your grill

 

with

the  Burner  lit  on  the  opposite  side.  You  can  also  use  the
supplied Cooking Grid with an aluminum drip pan underneath
allowing  you  to  collect  juices  for  making  gravies.  Remember,
indirect  cooking  requires  the  Lid  of your  grill  to be  down.

Preheating  your grill  is not required  for slow cooking  methods
such as roasting. If you do choose to preheat your grill before
roasting, turn the Burners on Hi and close Lid for approximately
2-3  minutes.

Oven Temperature

Slow

300° - 340° F

Moderate

355° - 390° F

High

410° - 480° F

Recommended Grill Setting

Both outside Burners on  LOW
1 outside Burner  on Hi and 1 outside  Burner on LOW
Both  outside  Burners  on  Hi

Warning:  Do  not  use  the  infrared  burner  when  indirect  cooking  (roasting  and  baking)  or
anytime  when  the  grill  lid  is  down.

Guide  to  Roasting  and  Baking  Using  the  Main  Burners

Food preparation

Trim meat of excess fat. Truss meat and poultry with cooking
string to retain shape if desired. Bacon strips can be used to
cover  the  outside  surface  of  lean  meat  and  poultry  to  help
prevent it from drying out. Another method for keeping food
moist during roasting  is to  put water  in  a  cooking pan, then
cover with foil. The foil should be removed for the first or the
last  part of  the  cooking  time  to  ensure proper  browning.

Tips for roasting

Except when roasting with water in a roasting pan, the juices
that  collect  in  the  pan  can  be  used  as  the  base  for  a  tasty
sauce or gravy. Place a cooking pan directly over the heat, add
extra butter if needed, then add several spoonfuls of flour to
thicken sauce. Finally, add sufficient chicken or beef stock to
obtain  the  desired  consistency.

Once the meat is cooked, remove it from your grill and cover
with a piece of foil. Allow it to stand for 10-15 minutes which
allows  the juices to settle. This  will make carving easier  and
ensure  a  tender,  juicy  roast.

BAKING  TECHNIQUES

From  casseroles  and  cornbread  to  delicious  desserts  like
fondue  fruit  skewers  or  crumb  cake,  baking  on  the  grill  is  as
easy  as  baking  in  the  kitchen.

Preparing to Bake

To bake in your new grill you'll need a baking dish or cast-iron
cooking  pan,  and  a  pair  of  flame  retardant  BBQ  Mitts.  If  the
cooking pan is cast-iron be sure to season the pan before use.

Preheat your  grill  3-5 minutes,  then lower  heat to  achieve  the
baking  temperature  desired.  Baking  uses  the 

indirect  cook-

ing

 method. Therefore, your cooking pan should be placed on

the left or right side of your grill with the burner lit on the opposite
side.

Tips for Baking

Prepare your  favorite recipe  as  you  would  in the kitchen.
Foods  cooked  in  the  grill  for  long  periods  of  time  should
always  be  covered  in  aluminum  foil  to  retain  moisture.  You
will  need to  stir the  food  several  times  as  it  bakes,  and  add
additional  liquid  if  required.

Watch the temperature, and adjust to cook according to your
recipe  directions.

Содержание STS2611ALP


















































Отзывы: