Barbecook KARL, Руководство пользователя, Страница: 6 / 50

www.barbecook.com 6
5 GETTING THE APPLIANCE READY
FOR USE
a long match.
5.1 Which charcoal should I use?
Close your bag of charcoal properly before storing it.
Always store it in a dry place, do not store it in a cellar.
Always light your appliance with traditional charcoal, never with
briquettes. Once the appliance is lit, you can add briquettes.
6.2 Preventing food from burning
6.3 Preventing food from sticking
To prevent your food from sticking to the grill:
•
6.4 Adding charcoal
To prevent your food from burning:
•
container. Wait until the charcoal is covered with a thin layer
of white ashes.
• Oil the food lightly with a brush before you put it on the grill.
You can also oil the grill itself.
• Avoid exposing your food to excessive heat. You can reduce
the heat by decreasing the speed of the fan.
7.1 Cleaning the appliance
base in the dishwasher.
7.2 Cleaning the grill
You can also clean these components by hand, using a
soft sponge or cloth and a regular detergent.
Never use acid, white spirit
to clean the appliance.
You can also clean the grill with a soft detergent or with with
sodium bicarbonate. Never use oven cleaners on the grill.
a a We recommend cleaning the grill after each use, with
Barbecook cleaner.
5.2 Step 1: Placing the charcoal
grill grill Do not put the grill on the appliance yet. An empty
can deform when held in the heat for too long.
5.4 Step 3: Placing the grill and food
follows:
1 Put gloves on. Keep them on during the entire procedure.
2 Carefully release the clips and remove the grill from the
appliance.
3 Remove the cover from the charcoal container and add the
charcoal.
4 Put the cover on the charcoal container.
5
7 MAINTAINING THE APPLIANCE
The main steps of this task are illustrated in Figures 6 and
7, on page 50.
1
electrical fan. Set the control knob to the highest position.
2 Put the cover on the charcoal container.
The main steps of this task are illustrated in Figures 8
through 10, on page 51.
The main steps of this task are illustrated in Figures 2
1
2
Do not cook before the fuel (charcoal) has a coating of ash.
Normally, this takes about 15 minutes.
3 Put your food on the grill.
We recommend cleaning the appliance after each use. Proceed
as follows:
1 Let the appliance cool down completely.
2 Release the clips and remove the grill. Clean the grill as
described in “7.2 Cleaning the grill”.
3 Remove the charcoal container (with cover and base) and
the inner bowl from the outer bowl.
4 Clean the outer bowl and the electrical components with a
wet cloth or brush.
5 Put the inner bowl, the charcoal container, the cover and the
decreasing the speed of the fan:
• The faster the fan turns, the more air is blown into the
• Use the control knob to adjust the speed of the fan.
through 5, on page 50.
Once the appliance is fully assembled and the batteries are in
place, you can place the charcoal. Proceed as follows:
1 Put the bowl in the appliance.
2 Put the charcoal plate in the charcoal container.
3 We recommend using 500 grams of charcoal and 3
4 Put the charcoal container in the bowl.
Tip: this appliance has a USB slot. You can also feed
the ventilator by connecting the appliance to a
powerbank. Please keep the powerbank at a safe
distance from the heat appliance!
5.3 Step 2: Lighting the charcoal
6 USEFUL TIPS AND TRICKS
grill
with
a