barbas Wi-Fi Box / Puck, Инструкция по установке и эксплуатации

Страница: 14 / 40

The 'Barbas Bellfires Gas' app
starts to connect the Wi-Fi Box to
the selected home network.
If connection is successful proceed
with Fireplace settings. Continue
the instructions in chapter
7.4
.
If connection is unsuccessful se-
lect Standard Setup. Continue the
instructions in chapter
7.3
.
or
Press the reset button on the Wi-Fi
Box for 7 seconds and select Re-
try.
7.3 Connecting to the home network with standard setup
Note:
• Make sure the router obeys the requirements given in chapter
4.1
.
• Before you continue with the connection procedure, make sure that your
mobile device is connected to the correct network (only If multiple Wi-Fi
networks are available).
Note: This step does
not show when KWIK
connect failed and you
selected Standard Set-
up.
• Select the '+' sign
• For Android devices, to contin-
ue, give permission to open the
location of the device.
Setup
14